MIL-PRF-85045/19A
Part or Identifying number (PIN):
M85045/19-01L
(24
fiber,
multimode).
M85045/19-01F
(33
fiber,
multimode).
M85045/19-01M
(36
fiber,
multimode).
M85045/19-02L
(24
fiber,
single-mode).
M85045/19-02F
(33
fiber,
single-mode).
M85045/19-02M
(36
fiber,
single-mode).
"L" designates a 24-fiber cable.
"F" designates a 33-fiber cable.
"M" designates a 36-fiber cable.
Qualification by similarity:
Manufacturers who produce products for both MIL-PRF-85045/13 and products for this
specification sheet and are qualified under MIL-PRF-85045/13, and pass all
applicable tests except the following, are qualified under this specification
sheet: fluid immersion, paint susceptibility, jacket self adhesion or blocking,
dripping, cable jacket tear strength, cable jacket material tensile and elongation,
water absorption, weathering, durability of identification, acid gas generation,
halogen content, toxicity index, thermal vacuum outgassing, odor, material
toxicity, and fungus tests. This qualification by similarity is applicable if the
same materials are used in the previously qualified MIL-PRF-85045/13 cable and the
cable under test.
Manufacturers who are qualified under MIL-PRF-85045/13 and MIL-PRF-85045/20 and use
the same jacket material for products under this specification sheet as used to
produce MIL-PRF-85045/13 products, are qualified under this specification sheet.
Manufacturers who are qualified under this specification sheet for multimode fiber
cable and whose single-mode fiber cable passes the visual and mechanical,
attenuation rate, temperature cycling, humidity, storage temperature, cyclic
flexing, crush, cable twist-bending, impact (low temperature only), tensile loading
and elongation, operating tensile loading, thermal shock and dynamic bend
inspections specified herein, are qualified under this specification sheet for
single-mode fiber cable. This qualification by similarity is applicable if the
only difference between the previously qualified cable and the cable under test is
that the optical fiber has been changed from a multimode fiber to a single-mode
fiber. Testing may be performed on either one or two lengths of cable, each with a
minimum length of 0.5 km. Test order must be observed up to and including the
storage temperature test. If only one cable length is used, the thermal shock test
shall be performed after the storage temperature test.
Manufacturers who are qualified under MIL-PRF-85045/20 for both multimode and
single-mode fiber cable and are qualified under this specification sheet for
multimode fiber cable are qualified under this specification sheet for single-mode
fiber.
Custodians:
Preparing activity:
Army - CR
Navy - SH
Navy - SH
Air Force - 11
Agent:
NASA - NA
DLA - CC
Review activities:
(Project 6015-0034-07)
Army - AR, AV, MI
Navy - EC, YD
Air Force - 02, 19, 80, 99
DLA - CC
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business