MIL-PRF-85045/16C
Environmental properties:
Temperature range:
Operating:
-28 to 65 °C
Nonoperating:
-40 to 70 °C
Storage:
-40 to 70 °C
Temperature cycling: Change in optical transmittance measurements may be made periodically. At a
minimum, one optical transmittance measurement shall be made over a period of 1 hour at the end of each
temperature plateau.
Thermal shock: Applicable, except perform at the operating temperature extremes.
Temperature humidity cycling: Change in optical transmittance measurements may be made periodically. At a
minimum, one optical transmittance measurement shall be made at the end of each temperature plateau.
Storage temperature: Applicable.
Weathering: Not applicable.
Fluid immersion: Not applicable.
Flame extinguishing and smoke generation: Not applicable.
Flaming smoke generation: Dm<225 when tested in the flaming condition in accordance with ASTM E662. The
size and configuration of the test specimen shall conform to the 76- by 76-mm (3- by 3-inch) square specified in
ASTM E662. The thickness of the test specimen shall be 2 mm (0.08 inches). The specimen shall be constructed by
laying 76-mm (3-inch) lengths of OFCC adjacent to one another to form a 76-mm (3-inch) strip. Wire or cable
clamps may be used to permanently hold the OFCC lengths in place. Longer OFCC lengths may be used if the top
or bottom clamps are used to hold the OFCCs. If top or bottom clamps are used, the length of OFCC exposed
outside of the clamp(s) shall be 76 mm (3 inches).
Shock: Not applicable.
Paint susceptibility: Not applicable.
Electromagnetic effects: Not applicable.
Chemical properties:
Halogen content: <0.2 percent
Part or identifying number (PIN):
M85045/16-01 (Multimode)
M85045/16-02 (Single-mode)
Qualification and conformance inspection: See table I. (Note: Preconditioning. If preconditioning is required, it
shall be performed as part of cable fabrication process and supplied already preconditioned. No preconditioning
shall be performed as part of qualification).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business