MIL-PRF-85045/16C
TABLE II. Qualification and conformance by similarity.
Conformance
M85045/16-01 1/
M85045/16-02 2/
PIN
inspection 3/
Group
Inspection
I
Size inspection
X
X
A
Attenuation rate
X
X
A
III
Temperature cycling
X
X
C
Low temperature
X
X
B
flexibility (cold bend)
IV
Thermal shock
X
X
--
OFCC kink
X
X
--
V
Flaming smoke generation
X
X
C
NOTES:
1/
Where manufacturers are qualified for MIL-PRF-85045/17-01 or MIL-PRF-85045/18-01.
2/
Where manufacturers are qualified for MIL-PRF-85045/17-02 or MIL-PRF-85045/18-02.
3/
All conformance tests required for all qualified PINs.
Intended use: This cable is intended for use as jumper cordage and pigtails for fiber optic components. This
cable is intended for use inside of protected enclosures and is not intended for installation in the overheads or
cableways.
Bandwidth measurements (multimode only): For this cable construction, the bandwidth is measured as part of
the requirements of the optical fiber to be cabled. The bandwidth value does not change once the optical fiber is
cabled. Since the bandwidth is provided as one of the cable measured parameters, the acceptable bandwidth for the
optical fiber used in this cable (and by extension, the cable) is provided for informational purposes.
Bandwidth (multimode cables only):
For cable with MM: 62.5/125 micron fiber: ≥200 MHz-km at 850±20 nm, ≥500 MHz-km at 1300±20 nm for
cable with MM fiber.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with
respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army CR
Navy SH
Navy SH
(Project 6015-2012-013)
Air Force 85
NASA NA
Review activities:
Army AR, AV, MI
Navy EC, YD
Air Force 02, 19, 70, 99
DLA CC
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.dla.mil.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business